Home / Articles / Adobe Creative Suite / Professional Typography with Adobe InDesign: Leading

Professional Typography with Adobe InDesign: Leading

  • Sample Chapter is provided courtesy of Adobe Press.
  • Date: Jul 28, 2010.

Chapter Description

Nigel French discusses the details of leading (the space between lines of type) in Adobe InDesign, including general rules of thumb, exceptions, and the use of auto leading.

LEADING (pronounced "ledding") is the space between lines of type, sometimes referred to as line spacing. The term comes from the days of hot-metal typesetting when thin strips of lead, known as reglets, were inserted by hand between the lines of type to add vertical space. Lines of type without these strips of lead were — and still are — referred to as "set solid." Leading plays a big part in the readability of your text. Body text is usually made more readable by a positive amount of leading (a leading value greater than the point size of the type). Headlines and display type, however, may benefit from negative leading (a leading value less than the point size of the type).

Getting the Lead Out

When it comes to leading there is no "one size fits all." On one hand, tight leading increases the density of the type and gives your type authority. On the other, if you go too tight your type looks claustrophobic, and the descenders of one line may collide with the ascenders of the next. On one hand, loose leading can create a luxurious look. On the other, if the leading is too loose, the lines of type look like individual strips that don't belong together as paragraphs. This is especially true if the leading value is greater than the size of the space between the paragraphs.

Figure 4.1

Figure 4.1 Leading is indicated by the red strips between the lines. The total leading is measured from the baseline of one line to the baseline of the next.

Leading is measured in points from one baseline to the next. The leading value includes the point size of the typeface and the actual space between the lines. Thus, 10-point type with 12 points of leading really means two points of space between each line. This is written 10/12, spoken as "10 on 12." Other common type size and leading combinations for body text are 9/11, 11/13, and 12/15.

How Much is enough?

Bad leading makes your text harder to read because the eye has trouble locating the next line of type. Getting the leading just right depends on several variables:

  • The nature of the text. While text intended for continuous reading benefits from some breathing space, a short burst of advertising copy or a title might be more effective if the lines are tightly leaded.
  • Type size. As type point size increases, you will want proportionally less leading. With display sizes, the same relative amount of space between the lines appears larger, so much so that it's common to use negative leading for display type.
  • The width of the column. Increase leading as you increase column width. Increasing the leading anywhere from 0.5 point to 2 points improves readability by keeping the lines distinct and preventing the eye from dropping off to the line below or doubling back to reread the same line.
  • The width of the column gutters. Leading, like all type attributes, needs to work in harmony with everything else on the page. The width of the column gutters should be the same as the leading value or a multiple thereof. If the gutters are too small there will be a tendency to read across the columns; too large and the separate columns will look unconnected.
    Figure 4.2

    Figure 4.2 You can measure the leading value used on a printed piece with a leading gauge.

    Figure 4.3

    Figure 4.3 An excerpt from Beatrice Ward's influential 1932 essay on typography The Crystal Goblet, showing common leading and type size combinations.

    Figure 4.4

    Figure 4.4 Positive leading works OK for body text sizes (A), but as the type gets bigger (B), proportionally less leading is needed (C).

    Figure 4.5

    Figure 4.5 Leading and column width. In the top example the leading is too tight; below, the leading has been increased to compensate for the wide column.

    Figure 4.6

    Figure 4.6 In the example on the left, the gutter width is the same as the leading value. In the center, the gutter width is too big and the columns lose their visual relationship to each other. On the right, the gutter is too small so that the two columns look almost like a single line.

  • The size of the word spaces. Justified type in narrow columns, such as in newspapers, may result in word spaces that are larger than the leading size. This causes the eye to jump to the next line rather than to the next word. In such situations, adding extra leading ensures that the space between the lines is at least as wide as the space between the words. Better still, don't set justified type in narrow columns.
  • The color of the background. Because we're used to reading black type on white paper, when we use the opposite, we're guaranteed to get attention. However, reversed type tends to "sparkle," making it hard to read. A slight increase in leading — as well as avoiding fonts with delicate serifs — can compensate.
    Figure 4.7

    Figure 4.7 With justified type on a narrow measure, it helps to increase the leading to ensure that the space between the lines is not less than the space between the words.

    Figure 4.8

    Figure 4.8 Type that reverses out of a solid color benefits from increased leading (right).

  • The characteristics of the typeface. Typefaces with larger x-heights, such as Helvetica, are perceived as bigger than other typefaces at equivalent sizes. The lowercase letters are large relative to the size of the overall character, and thus require more leading.

    Didone (also called Modern) typefaces, like Bodoni, that have a strong vertical stress guide the eye down the page rather than across the line. Adding more leading with these typefaces keeps the eye tracking horizontally rather than vertically.

Figure 4.9

Figure 4.9 Typefaces with a large x-height, like Helvetica, require more leading. Didone or Modern typefaces, like Bodoni, that have a strong vertical stress require more leading to keep the eye moving along the line, rather than down the page.

Figure 4.10

Figure 4.10 Even though Bernhard Modern has elongated ascenders, it has a low x-height and short descenders, and so can be leaded tightly (bottom).

Figure 4.11

Figure 4.11 Raniscript has elongated ascenders and descenders, but its low x-height means it looks good tightly leaded.

Typefaces that combine a low x-height with particularly tall ascenders require special treatment. The low x-height begs for tighter leading, but tighter leading might lead to the ascenders and descenders colliding. Much depends on the characters themselves. If you're working on display type, rewording — if you have editorial license — might make all the difference. Let common sense prevail — and be open to the possibility that colliding ascenders and descenders might even look good in certain situations.

Bold and Semibold typefaces benefit from extra leading to prevent the type color — the darkness or blackness of the letterforms as a block — appearing too dense.

Typefaces with small x-heights, like Garamond, appear to have more horizontal space between lines and thus require less leading.

Type set in all caps requires less leading because the lack of descenders makes the lines appear farther apart.

Figure 4.12

Figure 4.12 The same headline in all caps needs less leading because there are no descenders.

Figure 4.13

Figure 4.13 Stacked all caps with negative leading to create a wall of type.

When you work in points, there's an easy way to determine the leading value for a specific number of lines in your type area. First, draw a rectangle between the top and bottom margins of a page. Then, insert your cursor in the Control Panel after the height value of the rectangle and type /N (where N is the desired number of lines). Press the Tab key to divide the height of the rectangle by the number of lines. The new height of the rectangle is your desired leading value. You can now delete the rectangle.

Figure 4.14

Figure 4.14 By default the Auto Leading value is 120% of the point size of the type. When Auto Leading is chosen the value appears in parentheses on the Control panel.

2. (Not) Using Auto Leading | Next Section

Adobe Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Adobe Press and its family of brands. I can unsubscribe at any time.

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Adobe Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email ask@peachpit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.adobepress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020